| T-BAR CONTROLLER |
 |
VP-1002A Series |
| Conductive plastic resistor element used (Low slide noise). 50mm control-bar. Slide switch (at both ends ON) is optional. |
| Last update: 2023.04.14. | [Electrical-spec] | [Mechanical-spec] | [Note] | [Dimensions] | [Model-number] | EU-RoHS |
| Information |
| Electrical specifications | VP-1002A Series |
| Products | VP-1002A*-** |
| Number of circuits Type of output laws |
1 Linear taper |
| Circuit method | Potentiometer circuit |
| Total resistance (1-C) | 5kohm, 10kohm |
| Total resistance tolerance | ±20% |
| Linearity | ±5% |
| Residual resistance (1-2), (2-C) | 30ohm or less |
| Voltage proof | 1 Min. at AC500V |
| Insulation resistance | 50Mohm or more at DC500V |
| Max rating | 0.1W |
| Maximum input voltage | DC30V or less |
| Rated Resistive Load - Switch | DC30V 50mA |
| Sliding noise level | 47mV or less (by JIS C 6443) |
| Sliding life | 100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV) |
| Mechanical specifications | VP1002A Series |
| Operating angle | 60 degrees ±1 degrees |
| Operating force | 0.3 to 0.5N |
| Stopper strength | 50N |
| Push-pull strength | 50N |
| General specifications | VP1002A Series |
| Temperature range | -10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage) |
| Relative humidity | 90%RH (No condensation) |
| Note |
| * Solder heat resistance: 350deg C max, 5sec max, 2 times. (Manual
soldering only) * Please take care during soldering that the smoke from the solder does not flow inside a fader. * If the flux sticks to a resistor board, it may cause a trouble with the fader. |
| * It is highly recommended that the fault tolerant system is to be set up in the big situation like the live broadcast. |
| * This product is designed on the assumption of the horizontal use. * The enough operational testing is highly recommended for the slant or the vertical use to prevent the unexpected operation. |
| * Replacing it from other brands tests it enough, and please consider. |
| Dimensions - VP-1002A*-** | ||||
 |
||||
|
| Dimensions - Terminations |
 |
| Model number | ||||||||||
|
| *1 | Product number (Travel) | VP-1002A : VP-1002A Series |
| *2 |
Slide switch option |
Blank : Without W : With |
| *3 | Output law | B : Linear taper |
| *4 |
Total resistance |
10K : 10kohm 5K : 5kohm |
| Products No. ( X: Standard model) |
Output law | Resistance | Slide switch | Control-bar length | |
| VP-1002A-B5K | X | Linear | 5kohm | Without | 50mm |
| VP-1002A-B10K | X | Linear | 10kohm | Without | 50mm |
| VP-1002AW-B5K | Linear | 5kohm | With | 50mm | |
| VP-1002AW-B10K | Linear | 10kohm | With | 50mm | |
| Update list | |
| 2023.12.19. | Addition of maximum input voltage specification. Change in maximum ratings. |
| 2023.04.14. | Additional 3D data (step format). |
| 2022.11.10. | First edition |