English    Japanese   
TOP         PRODUCTS         TECHNOLOGY         DISTRIBUTORS         PRODUCT STATUS
     VARIABLE POTENTIOMETER

CP2500 (PAN) Series
For balance control applications
Conductive plastic resistor element used (Low rotational noise).
25mm square body.
300 degree operating angle.
Highly dustproof.
Last update: 2026.08.21. [Specifications] [Note] [Dimensions] [Model-number] [Update list] EU-RoHS

Information
 


Electrical specifications
(initial value)		 CP2500 (PAN)  Series
Products *CP2500*-A/C* *CP2500*-M/N*
Circuit method Potentiometer circuit
Total resistance (1-C) 5kohm,   10kohm,   50kohm,   100kohm
Total resistance tolerance ±20%
Matching total resistance 5%
Taper tolerance 10 - 25% (150 degs) 40 - 60% (75 or 225 degs)
Residual resistance Terminal 1 to C, Terminal 2 to C : 1% or 100ohm
Matching accuracy (150 degs) 3dB Max.
Voltage proof 1 Min. at AC500V
Insulation resistance 50Mohm or more at DC500V
Max rating 0.1W (Taper-M/N),  0.05W (Taper-A/C)
Maximum input voltage DC30V or less
Sliding noise level 47mV or less (by JIS C 6443)
Sliding life 100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical specifications CP2500 (PAN)  Series
Operating angle 300 degrees ±5 degrees
Rotational torque 0.1 to 1.5Ncm
Strength Nut-Attached 50Ncm
Attached parts Hexagonal nut (M9x0.75)
Stopper strength 50Ncm
Push-pull strength 50N

General specifications CP2500 (PAN)  Series
Temperature range -10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity 90%RH (No condensation)


Please check before use.
* Solder heat resistance: 350deg C max, 5sec max, 2 times. (Manual soldering only)
* Special order of the shaft length is possible. Please contact us for details.
* It is highly recommended that the fault tolerant system is to be set up in the big situation like the live broadcast.
* Replacing it from other brands tests it enough, and please consider.
* Terminal numbers output-law '1', '2', and 'C', not '3', '2', and '1'.


Outline


2CP2500 4CP2500  
* The shaft length of the file is 20 mm.
 

2CP2500 4CP2500  
* The shaft length of the file is 20 mm.
 

Terminations

Output law (Taper-A / Taper-B / Taper-C)


Model number
2 CP2500 S - A 10K / C 10K - 6R 22
*1 *2 *3   *4 *5   *4 *5   *6 *7


*1
 		 Number of circuits
 		 2 : Two circuits
4 : Four circuits
*2 Product number CP2500 : CP2500 Series
*3


 		 Mechanical click option


 		 Blank : Without click
S         : With click (15degrees step)
S3       : With click (30degrees step)
C         : Center click
*4


 		 Output law (Taper)
*The circuit on the shaft side is Taper-A(M).


 A / C       : Taper-A and Taper-C                 [ top - Taper-A - Taper-C - bottom ]
2-A / 2-C: Taper-A x2 and Taper-C x2       [ top - Taper-A - Taper-A - Taper-C - Taper-C - bottom ]
M / N       : Taper-M and Taper-N                 [ top - Taper-M - Taper-N - bottom ]
2-M / 2-N: Taper-M x2 and Taper-N x2       [ top - Taper-M - Taper-M - Taper-N - Taper-N - bottom ]
*5


 		 Total resistance


 		 5K     : 5kohm
10K   : 10kohm
50K   : 50kohm
100K : 100kohm
*6
 		 Shaft types
*Please see dimensions. 		 6R     : Φ6 Round Standard
6F      : Φ6 Flat
*7


 		 Shaft length
*Length from mounting surface to shaft end.

 		 20 : 20mm Standard
22 : 22mm
25 : 25mm
30 : 30mm


    Model Number Search 

  • 2CP2500-A5K/C5K-6R20
    (Two circuits, Without click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500-A10K/C10K-6R20
    (Two circuits, Without click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500-A50K/C50K-6R20
    (Two circuits, Without click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500-A100K/C100K-6R20
    (Two circuits, Without click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S-A5K/C5K-6R20
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S-A10K/C10K-6R20
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S-A50K/C50K-6R20
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S-A100K/C100K-6R20
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500C-A5K/C5K-6R20
    (Two circuits, Center click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500C-A10K/C10K-6R20
    (Two circuits, Center click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500C-A50K/C50K-6R20
    (Two circuits, Center click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500C-A100K/C100K-6R20
    (Two circuits, Center click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500-M5K/N5K-6R20
    (Two circuits, Without click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500-M10K/N10K-6R20
    (Two circuits, Without click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500-M50K/N50K-6R20
    (Two circuits, Without click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500-M100K/N100K-6R20
    (Two circuits, Without click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S-M5K/N5K-6R20
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S-M10K/N10K-6R20
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S-M50K/N50K-6R20
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S-M100K/N100K-6R20
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500C-M5K/N5K-6R20
    (Two circuits, Center click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500C-M10K/N10K-6R20
    (Two circuits, Center click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500C-M50K/N50K-6R20
    (Two circuits, Center click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500C-M100K/N100K-6R20
    (Two circuits, Center click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500-A5K/C5K-6F20
    (Two circuits, Without click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500-A10K/C10K-6F20
    (Two circuits, Without click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500-A50K/C50K-6F20
    (Two circuits, Without click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500-A100K/C100K-6F20
    (Two circuits, Without click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S-A5K/C5K-6F20
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S-A10K/C10K-6F20
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S-A50K/C50K-6F20
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S-A100K/C100K-6F20
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500C-A5K/C5K-6F20
    (Two circuits, Center click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500C-A10K/C10K-6F20
    (Two circuits, Center click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500C-A50K/C50K-6F20
    (Two circuits, Center click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500C-A100K/C100K-6F20
    (Two circuits, Center click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500-M5K/N5K-6F20
    (Two circuits, Without click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500-M10K/N10K-6F20
    (Two circuits, Without click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500-M50K/N50K-6F20
    (Two circuits, Without click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500-M100K/N100K-6F20
    (Two circuits, Without click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S-M5K/N5K-6F20
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S-M10K/N10K-6F20
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S-M50K/N50K-6F20
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S-M100K/N100K-6F20
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500C-M5K/N5K-6F20
    (Two circuits, Center click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500C-M10K/N10K-6F20
    (Two circuits, Center click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500C-M50K/N50K-6F20
    (Two circuits, Center click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500C-M100K/N100K-6F20
    (Two circuits, Center click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500-A5K/C5K-6R22
    (Two circuits, Without click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500-A10K/C10K-6R22
    (Two circuits, Without click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500-A50K/C50K-6R22
    (Two circuits, Without click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500-A100K/C100K-6R22
    (Two circuits, Without click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S-A5K/C5K-6R22
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S-A10K/C10K-6R22
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S-A50K/C50K-6R22
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S-A100K/C100K-6R22
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500C-A5K/C5K-6R22
    (Two circuits, Center click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500C-A10K/C10K-6R22
    (Two circuits, Center click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500C-A50K/C50K-6R22
    (Two circuits, Center click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500C-A100K/C100K-6R22
    (Two circuits, Center click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500-M5K/N5K-6R22
    (Two circuits, Without click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500-M10K/N10K-6R22
    (Two circuits, Without click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500-M50K/N50K-6R22
    (Two circuits, Without click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500-M100K/N100K-6R22
    (Two circuits, Without click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S-M5K/N5K-6R22
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S-M10K/N10K-6R22
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S-M50K/N50K-6R22
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S-M100K/N100K-6R22
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500C-M5K/N5K-6R22
    (Two circuits, Center click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500C-M10K/N10K-6R22
    (Two circuits, Center click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500C-M50K/N50K-6R22
    (Two circuits, Center click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500C-M100K/N100K-6R22
    (Two circuits, Center click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500-A5K/C5K-6F22
    (Two circuits, Without click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500-A10K/C10K-6F22
    (Two circuits, Without click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500-A50K/C50K-6F22
    (Two circuits, Without click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500-A100K/C100K-6F22
    (Two circuits, Without click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S-A5K/C5K-6F22
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S-A10K/C10K-6F22
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S-A50K/C50K-6F22
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S-A100K/C100K-6F22
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500C-A5K/C5K-6F22
    (Two circuits, Center click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500C-A10K/C10K-6F22
    (Two circuits, Center click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500C-A50K/C50K-6F22
    (Two circuits, Center click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500C-A100K/C100K-6F22
    (Two circuits, Center click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500-M5K/N5K-6F22
    (Two circuits, Without click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500-M10K/N10K-6F22
    (Two circuits, Without click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500-M50K/N50K-6F22
    (Two circuits, Without click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500-M100K/N100K-6F22
    (Two circuits, Without click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S-M5K/N5K-6F22
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S-M10K/N10K-6F22
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S-M50K/N50K-6F22
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S-M100K/N100K-6F22
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500C-M5K/N5K-6F22
    (Two circuits, Center click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500C-M10K/N10K-6F22
    (Two circuits, Center click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500C-M50K/N50K-6F22
    (Two circuits, Center click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500C-M100K/N100K-6F22
    (Two circuits, Center click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500-A5K/C5K-6R25
    (Two circuits, Without click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500-A10K/C10K-6R25
    (Two circuits, Without click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500-A50K/C50K-6R25
    (Two circuits, Without click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500-A100K/C100K-6R25
    (Two circuits, Without click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S-A5K/C5K-6R25
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S-A10K/C10K-6R25
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S-A50K/C50K-6R25
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S-A100K/C100K-6R25
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500C-A5K/C5K-6R25
    (Two circuits, Center click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500C-A10K/C10K-6R25
    (Two circuits, Center click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500C-A50K/C50K-6R25
    (Two circuits, Center click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500C-A100K/C100K-6R25
    (Two circuits, Center click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500-M5K/N5K-6R25
    (Two circuits, Without click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500-M10K/N10K-6R25
    (Two circuits, Without click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500-M50K/N50K-6R25
    (Two circuits, Without click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500-M100K/N100K-6R25
    (Two circuits, Without click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S-M5K/N5K-6R25
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S-M10K/N10K-6R25
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S-M50K/N50K-6R25
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S-M100K/N100K-6R25
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500C-M5K/N5K-6R25
    (Two circuits, Center click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500C-M10K/N10K-6R25
    (Two circuits, Center click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500C-M50K/N50K-6R25
    (Two circuits, Center click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500C-M100K/N100K-6R25
    (Two circuits, Center click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500-A5K/C5K-6F25
    (Two circuits, Without click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500-A10K/C10K-6F25
    (Two circuits, Without click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500-A50K/C50K-6F25
    (Two circuits, Without click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500-A100K/C100K-6F25
    (Two circuits, Without click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S-A5K/C5K-6F25
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S-A10K/C10K-6F25
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S-A50K/C50K-6F25
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S-A100K/C100K-6F25
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500C-A5K/C5K-6F25
    (Two circuits, Center click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500C-A10K/C10K-6F25
    (Two circuits, Center click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500C-A50K/C50K-6F25
    (Two circuits, Center click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500C-A100K/C100K-6F25
    (Two circuits, Center click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500-M5K/N5K-6F25
    (Two circuits, Without click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500-M10K/N10K-6F25
    (Two circuits, Without click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500-M50K/N50K-6F25
    (Two circuits, Without click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500-M100K/N100K-6F25
    (Two circuits, Without click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S-M5K/N5K-6F25
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S-M10K/N10K-6F25
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S-M50K/N50K-6F25
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S-M100K/N100K-6F25
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500C-M5K/N5K-6F25
    (Two circuits, Center click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500C-M10K/N10K-6F25
    (Two circuits, Center click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500C-M50K/N50K-6F25
    (Two circuits, Center click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500C-M100K/N100K-6F25
    (Two circuits, Center click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500-A5K/C5K-6R30
    (Two circuits, Without click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500-A10K/C10K-6R30
    (Two circuits, Without click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500-A50K/C50K-6R30
    (Two circuits, Without click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500-A100K/C100K-6R30
    (Two circuits, Without click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S-A5K/C5K-6R30
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S-A10K/C10K-6R30
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S-A50K/C50K-6R30
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S-A100K/C100K-6R30
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500C-A5K/C5K-6R30
    (Two circuits, Center click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500C-A10K/C10K-6R30
    (Two circuits, Center click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500C-A50K/C50K-6R30
    (Two circuits, Center click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500C-A100K/C100K-6R30
    (Two circuits, Center click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500-M5K/N5K-6R30
    (Two circuits, Without click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500-M10K/N10K-6R30
    (Two circuits, Without click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500-M50K/N50K-6R30
    (Two circuits, Without click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500-M100K/N100K-6R30
    (Two circuits, Without click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S-M5K/N5K-6R30
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S-M10K/N10K-6R30
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S-M50K/N50K-6R30
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S-M100K/N100K-6R30
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500C-M5K/N5K-6R30
    (Two circuits, Center click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500C-M10K/N10K-6R30
    (Two circuits, Center click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500C-M50K/N50K-6R30
    (Two circuits, Center click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500C-M100K/N100K-6R30
    (Two circuits, Center click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500-A5K/C5K-6F30
    (Two circuits, Without click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500-A10K/C10K-6F30
    (Two circuits, Without click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500-A50K/C50K-6F30
    (Two circuits, Without click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500-A100K/C100K-6F30
    (Two circuits, Without click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S-A5K/C5K-6F30
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S-A10K/C10K-6F30
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S-A50K/C50K-6F30
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S-A100K/C100K-6F30
    (Two circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500C-A5K/C5K-6F30
    (Two circuits, Center click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500C-A10K/C10K-6F30
    (Two circuits, Center click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500C-A50K/C50K-6F30
    (Two circuits, Center click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500C-A100K/C100K-6F30
    (Two circuits, Center click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500-M5K/N5K-6F30
    (Two circuits, Without click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500-M10K/N10K-6F30
    (Two circuits, Without click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500-M50K/N50K-6F30
    (Two circuits, Without click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500-M100K/N100K-6F30
    (Two circuits, Without click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S-M5K/N5K-6F30
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S-M10K/N10K-6F30
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S-M50K/N50K-6F30
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S-M100K/N100K-6F30
    (Two circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500C-M5K/N5K-6F30
    (Two circuits, Center click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500C-M10K/N10K-6F30
    (Two circuits, Center click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500C-M50K/N50K-6F30
    (Two circuits, Center click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500C-M100K/N100K-6F30
    (Two circuits, Center click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500-2-A5K/2-C5K-6R20
    (Four circuits, Without click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500-2-A10K/2-C10K-6R20
    (Four circuits, Without click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500-2-A50K/2-C50K-6R20
    (Four circuits, Without click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500-2-A100K/2-C100K-6R20
    (Four circuits, Without click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S-2-A5K/2-C5K-6R20
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S-2-A10K/2-C10K-6R20
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S-2-A50K/2-C50K-6R20
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S-2-A100K/2-C100K-6R20
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500C-2-A5K/2-C5K-6R20
    (Four circuits, Center click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500C-2-A10K/2-C10K-6R20
    (Four circuits, Center click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500C-2-A50K/2-C50K-6R20
    (Four circuits, Center click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500C-2-A100K/2-C100K-6R20
    (Four circuits, Center click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500-2-M5K/2-N5K-6R20
    (Four circuits, Without click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500-2-M10K/2-N10K-6R20
    (Four circuits, Without click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500-2-M50K/2-N50K-6R20
    (Four circuits, Without click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500-2-M100K/2-N100K-6R20
    (Four circuits, Without click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S-2-M5K/2-N5K-6R20
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S-2-M10K/2-N10K-6R20
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S-2-M50K/2-N50K-6R20
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S-2-M100K/2-N100K-6R20
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500C-2-M5K/2-N5K-6R20
    (Four circuits, Center click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500C-2-M10K/2-N10K-6R20
    (Four circuits, Center click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500C-2-M50K/2-N50K-6R20
    (Four circuits, Center click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500C-2-M100K/2-N100K-6R20
    (Four circuits, Center click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500-2-A5K/2-C5K-6F20
    (Four circuits, Without click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500-2-A10K/2-C10K-6F20
    (Four circuits, Without click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500-2-A50K/2-C50K-6F20
    (Four circuits, Without click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500-2-A100K/2-C100K-6F20
    (Four circuits, Without click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S-2-A5K/2-C5K-6F20
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S-2-A10K/2-C10K-6F20
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S-2-A50K/2-C50K-6F20
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S-2-A100K/2-C100K-6F20
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500C-2-A5K/2-C5K-6F20
    (Four circuits, Center click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500C-2-A10K/2-C10K-6F20
    (Four circuits, Center click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500C-2-A50K/2-C50K-6F20
    (Four circuits, Center click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500C-2-A100K/2-C100K-6F20
    (Four circuits, Center click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500-2-M5K/2-N5K-6F20
    (Four circuits, Without click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500-2-M10K/2-N10K-6F20
    (Four circuits, Without click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500-2-M50K/2-N50K-6F20
    (Four circuits, Without click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500-2-M100K/2-N100K-6F20
    (Four circuits, Without click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S-2-M5K/2-N5K-6F20
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S-2-M10K/2-N10K-6F20
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S-2-M50K/2-N50K-6F20
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S-2-M100K/2-N100K-6F20
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500C-2-M5K/2-N5K-6F20
    (Four circuits, Center click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500C-2-M10K/2-N10K-6F20
    (Four circuits, Center click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500C-2-M50K/2-N50K-6F20
    (Four circuits, Center click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500C-2-M100K/2-N100K-6F20
    (Four circuits, Center click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500-2-A5K/2-C5K-6R22
    (Four circuits, Without click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500-2-A10K/2-C10K-6R22
    (Four circuits, Without click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500-2-A50K/2-C50K-6R22
    (Four circuits, Without click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500-2-A100K/2-C100K-6R22
    (Four circuits, Without click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S-2-A5K/2-C5K-6R22
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S-2-A10K/2-C10K-6R22
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S-2-A50K/2-C50K-6R22
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S-2-A100K/2-C100K-6R22
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500C-2-A5K/2-C5K-6R22
    (Four circuits, Center click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500C-2-A10K/2-C10K-6R22
    (Four circuits, Center click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500C-2-A50K/2-C50K-6R22
    (Four circuits, Center click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500C-2-A100K/2-C100K-6R22
    (Four circuits, Center click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500-2-M5K/2-N5K-6R22
    (Four circuits, Without click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500-2-M10K/2-N10K-6R22
    (Four circuits, Without click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500-2-M50K/2-N50K-6R22
    (Four circuits, Without click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500-2-M100K/2-N100K-6R22
    (Four circuits, Without click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S-2-M5K/2-N5K-6R22
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S-2-M10K/2-N10K-6R22
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S-2-M50K/2-N50K-6R22
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S-2-M100K/2-N100K-6R22
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500C-2-M5K/2-N5K-6R22
    (Four circuits, Center click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500C-2-M10K/2-N10K-6R22
    (Four circuits, Center click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500C-2-M50K/2-N50K-6R22
    (Four circuits, Center click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500C-2-M100K/2-N100K-6R22
    (Four circuits, Center click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500-2-A5K/2-C5K-6F22
    (Four circuits, Without click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500-2-A10K/2-C10K-6F22
    (Four circuits, Without click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500-2-A50K/2-C50K-6F22
    (Four circuits, Without click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500-2-A100K/2-C100K-6F22
    (Four circuits, Without click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S-2-A5K/2-C5K-6F22
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S-2-A10K/2-C10K-6F22
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S-2-A50K/2-C50K-6F22
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S-2-A100K/2-C100K-6F22
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500C-2-A5K/2-C5K-6F22
    (Four circuits, Center click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500C-2-A10K/2-C10K-6F22
    (Four circuits, Center click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500C-2-A50K/2-C50K-6F22
    (Four circuits, Center click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500C-2-A100K/2-C100K-6F22
    (Four circuits, Center click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500-2-M5K/2-N5K-6F22
    (Four circuits, Without click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500-2-M10K/2-N10K-6F22
    (Four circuits, Without click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500-2-M50K/2-N50K-6F22
    (Four circuits, Without click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500-2-M100K/2-N100K-6F22
    (Four circuits, Without click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S-2-M5K/2-N5K-6F22
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S-2-M10K/2-N10K-6F22
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S-2-M50K/2-N50K-6F22
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S-2-M100K/2-N100K-6F22
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500C-2-M5K/2-N5K-6F22
    (Four circuits, Center click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500C-2-M10K/2-N10K-6F22
    (Four circuits, Center click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500C-2-M50K/2-N50K-6F22
    (Four circuits, Center click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500C-2-M100K/2-N100K-6F22
    (Four circuits, Center click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500-2-A5K/2-C5K-6R25
    (Four circuits, Without click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500-2-A10K/2-C10K-6R25
    (Four circuits, Without click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500-2-A50K/2-C50K-6R25
    (Four circuits, Without click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500-2-A100K/2-C100K-6R25
    (Four circuits, Without click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S-2-A5K/2-C5K-6R25
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S-2-A10K/2-C10K-6R25
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S-2-A50K/2-C50K-6R25
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S-2-A100K/2-C100K-6R25
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500C-2-A5K/2-C5K-6R25
    (Four circuits, Center click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500C-2-A10K/2-C10K-6R25
    (Four circuits, Center click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500C-2-A50K/2-C50K-6R25
    (Four circuits, Center click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500C-2-A100K/2-C100K-6R25
    (Four circuits, Center click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500-2-M5K/2-N5K-6R25
    (Four circuits, Without click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500-2-M10K/2-N10K-6R25
    (Four circuits, Without click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500-2-M50K/2-N50K-6R25
    (Four circuits, Without click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500-2-M100K/2-N100K-6R25
    (Four circuits, Without click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S-2-M5K/2-N5K-6R25
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S-2-M10K/2-N10K-6R25
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S-2-M50K/2-N50K-6R25
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S-2-M100K/2-N100K-6R25
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500C-2-M5K/2-N5K-6R25
    (Four circuits, Center click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500C-2-M10K/2-N10K-6R25
    (Four circuits, Center click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500C-2-M50K/2-N50K-6R25
    (Four circuits, Center click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500C-2-M100K/2-N100K-6R25
    (Four circuits, Center click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500-2-A5K/2-C5K-6F25
    (Four circuits, Without click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500-2-A10K/2-C10K-6F25
    (Four circuits, Without click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500-2-A50K/2-C50K-6F25
    (Four circuits, Without click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500-2-A100K/2-C100K-6F25
    (Four circuits, Without click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S-2-A5K/2-C5K-6F25
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S-2-A10K/2-C10K-6F25
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S-2-A50K/2-C50K-6F25
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S-2-A100K/2-C100K-6F25
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500C-2-A5K/2-C5K-6F25
    (Four circuits, Center click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500C-2-A10K/2-C10K-6F25
    (Four circuits, Center click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500C-2-A50K/2-C50K-6F25
    (Four circuits, Center click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500C-2-A100K/2-C100K-6F25
    (Four circuits, Center click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500-2-M5K/2-N5K-6F25
    (Four circuits, Without click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500-2-M10K/2-N10K-6F25
    (Four circuits, Without click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500-2-M50K/2-N50K-6F25
    (Four circuits, Without click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500-2-M100K/2-N100K-6F25
    (Four circuits, Without click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S-2-M5K/2-N5K-6F25
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S-2-M10K/2-N10K-6F25
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S-2-M50K/2-N50K-6F25
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S-2-M100K/2-N100K-6F25
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500C-2-M5K/2-N5K-6F25
    (Four circuits, Center click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500C-2-M10K/2-N10K-6F25
    (Four circuits, Center click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500C-2-M50K/2-N50K-6F25
    (Four circuits, Center click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500C-2-M100K/2-N100K-6F25
    (Four circuits, Center click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500-2-A5K/2-C5K-6R30
    (Four circuits, Without click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500-2-A10K/2-C10K-6R30
    (Four circuits, Without click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500-2-A50K/2-C50K-6R30
    (Four circuits, Without click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500-2-A100K/2-C100K-6R30
    (Four circuits, Without click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S-2-A5K/2-C5K-6R30
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S-2-A10K/2-C10K-6R30
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S-2-A50K/2-C50K-6R30
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S-2-A100K/2-C100K-6R30
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500C-2-A5K/2-C5K-6R30
    (Four circuits, Center click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500C-2-A10K/2-C10K-6R30
    (Four circuits, Center click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500C-2-A50K/2-C50K-6R30
    (Four circuits, Center click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500C-2-A100K/2-C100K-6R30
    (Four circuits, Center click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500-2-M5K/2-N5K-6R30
    (Four circuits, Without click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500-2-M10K/2-N10K-6R30
    (Four circuits, Without click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500-2-M50K/2-N50K-6R30
    (Four circuits, Without click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500-2-M100K/2-N100K-6R30
    (Four circuits, Without click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S-2-M5K/2-N5K-6R30
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S-2-M10K/2-N10K-6R30
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S-2-M50K/2-N50K-6R30
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S-2-M100K/2-N100K-6R30
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500C-2-M5K/2-N5K-6R30
    (Four circuits, Center click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500C-2-M10K/2-N10K-6R30
    (Four circuits, Center click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500C-2-M50K/2-N50K-6R30
    (Four circuits, Center click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500C-2-M100K/2-N100K-6R30
    (Four circuits, Center click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500-2-A5K/2-C5K-6F30
    (Four circuits, Without click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500-2-A10K/2-C10K-6F30
    (Four circuits, Without click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500-2-A50K/2-C50K-6F30
    (Four circuits, Without click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500-2-A100K/2-C100K-6F30
    (Four circuits, Without click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S-2-A5K/2-C5K-6F30
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S-2-A10K/2-C10K-6F30
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S-2-A50K/2-C50K-6F30
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S-2-A100K/2-C100K-6F30
    (Four circuits, With 15degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500C-2-A5K/2-C5K-6F30
    (Four circuits, Center click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500C-2-A10K/2-C10K-6F30
    (Four circuits, Center click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500C-2-A50K/2-C50K-6F30
    (Four circuits, Center click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500C-2-A100K/2-C100K-6F30
    (Four circuits, Center click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500-2-M5K/2-N5K-6F30
    (Four circuits, Without click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500-2-M10K/2-N10K-6F30
    (Four circuits, Without click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500-2-M50K/2-N50K-6F30
    (Four circuits, Without click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500-2-M100K/2-N100K-6F30
    (Four circuits, Without click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S-2-M5K/2-N5K-6F30
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S-2-M10K/2-N10K-6F30
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S-2-M50K/2-N50K-6F30
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S-2-M100K/2-N100K-6F30
    (Four circuits, With 15degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500C-2-M5K/2-N5K-6F30
    (Four circuits, Center click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500C-2-M10K/2-N10K-6F30
    (Four circuits, Center click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500C-2-M50K/2-N50K-6F30
    (Four circuits, Center click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500C-2-M100K/2-N100K-6F30
    (Four circuits, Center click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S3-A5K/C5K-6R20
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S3-A10K/C10K-6R20
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S3-A50K/C50K-6R20
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S3-A100K/C100K-6R20
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S3-M5K/N5K-6R20
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S3-M10K/N10K-6R20
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S3-M50K/N50K-6R20
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S3-M100K/N100K-6R20
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 2CP2500S3-A5K/C5K-6F20
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S3-A10K/C10K-6F20
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S3-A50K/C50K-6F20
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S3-A100K/C100K-6F20
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S3-M5K/N5K-6F20
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S3-M10K/N10K-6F20
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S3-M50K/N50K-6F20
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S3-M100K/N100K-6F20
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 2CP2500S3-A5K/C5K-6R22
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S3-A10K/C10K-6R22
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S3-A50K/C50K-6R22
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S3-A100K/C100K-6R22
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S3-M5K/N5K-6R22
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S3-M10K/N10K-6R22
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S3-M50K/N50K-6R22
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S3-M100K/N100K-6R22
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 2CP2500S3-A5K/C5K-6F22
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S3-A10K/C10K-6F22
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S3-A50K/C50K-6F22
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S3-A100K/C100K-6F22
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S3-M5K/N5K-6F22
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S3-M10K/N10K-6F22
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S3-M50K/N50K-6F22
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S3-M100K/N100K-6F22
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 2CP2500S3-A5K/C5K-6R25
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S3-A10K/C10K-6R25
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S3-A50K/C50K-6R25
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S3-A100K/C100K-6R25
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S3-M5K/N5K-6R25
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S3-M10K/N10K-6R25
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S3-M50K/N50K-6R25
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S3-M100K/N100K-6R25
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 2CP2500S3-A5K/C5K-6F25
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S3-A10K/C10K-6F25
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S3-A50K/C50K-6F25
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S3-A100K/C100K-6F25
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S3-M5K/N5K-6F25
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S3-M10K/N10K-6F25
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S3-M50K/N50K-6F25
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S3-M100K/N100K-6F25
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 2CP2500S3-A5K/C5K-6R30
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S3-A10K/C10K-6R30
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S3-A50K/C50K-6R30
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S3-A100K/C100K-6R30
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S3-M5K/N5K-6R30
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S3-M10K/N10K-6R30
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S3-M50K/N50K-6R30
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S3-M100K/N100K-6R30
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 2CP2500S3-A5K/C5K-6F30
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S3-A10K/C10K-6F30
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S3-A50K/C50K-6F30
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S3-A100K/C100K-6F30
    (Two circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S3-M5K/N5K-6F30
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S3-M10K/N10K-6F30
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S3-M50K/N50K-6F30
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 2CP2500S3-M100K/N100K-6F30
    (Two circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S3-2-A5K/2-C5K-6R20
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S3-2-A10K/2-C10K-6R20
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S3-2-A50K/2-C50K-6R20
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S3-2-A100K/2-C100K-6R20
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S3-2-M5K/2-N5K-6R20
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S3-2-M10K/2-N10K-6R20
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S3-2-M50K/2-N50K-6R20
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S3-2-M100K/2-N100K-6R20
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 20mm)
  • 4CP2500S3-2-A5K/2-C5K-6F20
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S3-2-A10K/2-C10K-6F20
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S3-2-A50K/2-C50K-6F20
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S3-2-A100K/2-C100K-6F20
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S3-2-M5K/2-N5K-6F20
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S3-2-M10K/2-N10K-6F20
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S3-2-M50K/2-N50K-6F20
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S3-2-M100K/2-N100K-6F20
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 20mm)
  • 4CP2500S3-2-A5K/2-C5K-6R22
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S3-2-A10K/2-C10K-6R22
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S3-2-A50K/2-C50K-6R22
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S3-2-A100K/2-C100K-6R22
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S3-2-M5K/2-N5K-6R22
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S3-2-M10K/2-N10K-6R22
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S3-2-M50K/2-N50K-6R22
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S3-2-M100K/2-N100K-6R22
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 22mm)
  • 4CP2500S3-2-A5K/2-C5K-6F22
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S3-2-A10K/2-C10K-6F22
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S3-2-A50K/2-C50K-6F22
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S3-2-A100K/2-C100K-6F22
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S3-2-M5K/2-N5K-6F22
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S3-2-M10K/2-N10K-6F22
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S3-2-M50K/2-N50K-6F22
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S3-2-M100K/2-N100K-6F22
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 22mm)
  • 4CP2500S3-2-A5K/2-C5K-6R25
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S3-2-A10K/2-C10K-6R25
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S3-2-A50K/2-C50K-6R25
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S3-2-A100K/2-C100K-6R25
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S3-2-M5K/2-N5K-6R25
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S3-2-M10K/2-N10K-6R25
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S3-2-M50K/2-N50K-6R25
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S3-2-M100K/2-N100K-6R25
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 25mm)
  • 4CP2500S3-2-A5K/2-C5K-6F25
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S3-2-A10K/2-C10K-6F25
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S3-2-A50K/2-C50K-6F25
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S3-2-A100K/2-C100K-6F25
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S3-2-M5K/2-N5K-6F25
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S3-2-M10K/2-N10K-6F25
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S3-2-M50K/2-N50K-6F25
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S3-2-M100K/2-N100K-6F25
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 25mm)
  • 4CP2500S3-2-A5K/2-C5K-6R30
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S3-2-A10K/2-C10K-6R30
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S3-2-A50K/2-C50K-6R30
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S3-2-A100K/2-C100K-6R30
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S3-2-M5K/2-N5K-6R30
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S3-2-M10K/2-N10K-6R30
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S3-2-M50K/2-N50K-6R30
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S3-2-M100K/2-N100K-6R30
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Round shaft type, Shaft length 30mm)
  • 4CP2500S3-2-A5K/2-C5K-6F30
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S3-2-A10K/2-C10K-6F30
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S3-2-A50K/2-C50K-6F30
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S3-2-A100K/2-C100K-6F30
    (Four circuits, With 30degrees click, Taper-A and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S3-2-M5K/2-N5K-6F30
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 5kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S3-2-M10K/2-N10K-6F30
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 10kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S3-2-M50K/2-N50K-6F30
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 50kohm, Flat shaft type, Shaft length 30mm)
  • 4CP2500S3-2-M100K/2-N100K-6F30
    (Four circuits, With 30degrees click, Taper-M and C, Resistance 100kohm, Flat shaft type, Shaft length 30mm)


   After selecting each specification, the model number for ordering appears at the top.
   (If blank, there is no target model.)

   Number of circuits : Two circuit Four circuits
   Mechanical click option : Without click With click (15degrees step) With click (30degrees step) Center click
   Output law : Taper-A and C Taper-M and N
   Total resistance value : 5kohm 10kohm 50kohm 100kohm
   Shaft types : Round Flat
   Shaft length : 20mm 22mm 25mm 30mm
    When reloading the browser, please press Reset once.




Update list
   
2024.06.21. First edition